If you are a trustworthy cleaning freak, you must do it every week to ensure your car looks new and shiny, from the upper look to the interiors. Most people use hand cleaning to clean their vehicles, and people also use this method when it comes to cleaning the wheel. However, it’s fun doing so even if you have so many products available at the market for the said purpose. It’sIt’s excellent if you want to stand in line immediately. You may want your car or wheel to clean as soon as possible in a short period.
People who own cars and love to clean their vehicles regularly definitely use the proper deep cleaning method for all the dirt from every corner of the vehicle, though wheels are an essential part of the car; hence they need more care and attention about cleaning. While applying ceramic coating on your vehicle is necessary, but even most important to put that coating on your car wheels. If you clean through ceramic cleaning, your load might get less while cleaning the wheels.
In the past, people used to do this wheel cleaning by hand method and do it casually, which got them tough and took them more time comparatively. This ceramic coating method has been found to make the chore easy for everyone as it takes less time and cleans the wheels properly from every corner of the car. These high-end products like you may find in some websites, though, make a little heavy lift on your pocket, making your load extremely easy. Ceramic coating provides:
- It will give Protection to your car that lasts longer.
- Putting a shiny gloss on your car and wheels.
- Giving you a great experience.
What products do you need for your wheel’s ceramic coating?
Products you will require before going into applying the ceramic coating method. First, you have to gather those products and supplies which are essential as well as present, which will be used to prepare the wheels before even applying the ceramic coating. The first thing you must have while cleaning is a wheel brush with gentle bruises to clean the wheels; gentle bruises will protect your wheels from any scratch. It would be best if you had a bucket full of water which will be a must to be there cleaning the complete process. Other than that, it would be best if you had a drying towel that will be used after cleansing and washing.
Make sure you’re using the right products for cleaning, as you will be cleaning the most important part, the wheels. It would be best if you had an iron remover and tar remover, specially made for cleaning the cars, and you need to have that for the wheels. Arrange the car shampoo, which should be pH balanced, and it will help you remove the impurities left after the brake dust. And then lastly, you will need the surface prep spray, which is specially used for ceramic coating. Put the microfiber and lint-free towel at the end of the process to dry out the wash and water under the wheels.
Once you get the items mentioned above, make sure that when you apply the ceramic coating on the wheels, try to put your hands on the car jack and get off the wheels carefully. Once you detach the car wheels, it will be helpful for you to clean the wheels and car separately. Make sure you use this method, as it gives you the best cleaning experience and protects your car and wheels with the ceramic coating.
Before going into another step, you need to have all the tools and products which will be helpful to separate the wheels from the car. One piece of advice is required for you to do ceramic coating while your vehicle is standing in the shaded area; it will make it easy for you and protect your car from direct sunlight.
Here are the products you need to get them as soon as possible before doing the process.
- Car shampoo will be need
- Brush with a soft bristle
- Spray for Tar remover
- Spray for iron remover
- Bucket for wash
- Several clothes for lint-free application
- Various microfiber towels for drying purposes
- Spray to prep the ceramic coating
- Tools for wheel removal and car jack
- Small flashlight
How much time will it take to apply a ceramic coating on wheels?
Overall the process of ceramic coating the wheels will take approximately 5 hours. However, you were not allowed to drive your car for approx. 2 hours after the coating process. You have to wait for the vehicle to absorb all the coating you have done to your car correctly before even going to drive it; otherwise, the dirt will catch the wheel’s layer.
You need to follow the steps to clean the wheels for ceramic coating.
Step One – prep the wheels before coating
If you want to do it perfectly, you have to begin the process and remove the car wheels separately. If you have only one car jack stand, you will take extra time to finish it because you have to remove the wheels separately one by one at one time.
However, you do not have to remove the wheels before cleaning the process, but if you do it, it will be more effective for you in the longer run. If you do it with attached wheels, your cleaning will not be correctly done. The wheels’ inside needs the most cleaning as the dust is stuck on the inner side of the brake. You need to know that the ceramic coating can get stuck into the brake when the wheels are attached to the car. It will be dangerous for you as it will increase the chances of brake failure.
Step two- application process
Once you properly clean the wheel, which will look brand new, you must apply the ceramic coating. You will be doing this coating process outside the home to ensure not to expose the sunlight on the car and wheels. As sunlight can damage the coating, make sure you apply it correctly and do not put it on the bolt holes or the nuts. This application process is as simple as using the paint on the glass
Apply the ceramic coating systematically from left to right, and let the layer dry for some time. If you see the wheel sweating, the process is complete. That sweat you will see at the end will be the leftover coating and didn’t bond and get off as sweat. And then clean that with the microfiber towel.